Super People 2 - Macros for M416S - logitech
Content: SP-M416S-logitech.zip (10.42 KB )
Uploaded: 01.11.2022
Positive responses: 0
Negative responses: 0
Sold: 2
Refunds: 0
Seller: MacrOleg
$2.77
Macros of the "No Recoil" class, that is, LUA scripts for Logitech G-series mice that support-Logitech Gaming Software and GHUB, in the game Super People almost completely removes the vertical recoil from the M416S.
sensitivity for 1x - 50, 2x - 48, 4x - 47. For 90...144 fps (in the line: m416_ms = 89), for 60 fps (m416_ms = 97). If you have a different FPS, then you will need to choose a different value.
Enabling scripts is carried out by pressing the control buttons of the mouse once, pressing again turns off the script.
5th mouse button - on/off script.
4th mouse button - switching between sights 1х - > 2х - > 4х.
For comfortable use of scripts, you need keyboards with buttons: NumLock and CapsLock.
There are also separate recoil removal modes for different sights. Control is carried out using the 4th mouse button.
1x - this mode of removal is enabled by default after starting the script (NumLock and CapsLock are disabled).
2x - the recoil removal mode for this sight is turned on after the first single press of the 4th mouse button (NumLock on the keyboard lights up).
4x - the second pressing of the 4th mouse button will turn on the removal mode for this sight (CapsLock will light up, NumLock will go out).
The third press will return to the 1st sight and so on in a circle (CapsLock will go out).
v6.1 - after starting the script, removing the recoil for 1x...4x sights when pressing the left mouse button. With the right mouse button pressed, there is a fixed recoil removal mode for the 1st sight (mouse sensitivity settings in the game, for third-person shooting - 49). That is, for example, you have the recoil removal mode turned on for the 4x sight, then for third-person shooting you will have the recoil removing mode for the 1x sight.
v6.2 - removing the recoil in these scripts only when the right mouse button and the left mouse button are pressed. If you do not press the right button, the left button will work in its normal mode. That is, these scripts for the aiming mode, in which aiming is carried out by holding the right mouse button in the pressed state.
IF YOU HAVEN´T FOUND THE RIGHT MACRO ON SALE. THEN I CAN MAKE YOU A MACRO FOR A CERTAIN PAYMENT.
Attention!!! If you can´t pay with a bank card. Then you need Litecoin and get it easy:
1. Sign up for Payeer: https://payeer.com/?session=13084023
2. Register with the European Exchanger: https://changer4u.com/ru/aff/e60c9d86e365ae81439dedefa2ad227e3ac569d6
3. Replenish Payeer with an exchanger.
4. In Payeer replenish Litecoin.
5. When buying, choose Litecoin from the payment methods.
When paying with Litecoin, there is no banking commission and the price of the item is lower.
You can also pay with skins from Steam: https://dzen.ru/video/watch/65c05a87bf878653f5ccff1d
Scripts were written for 40 rounds, for shooting from a standing position in the first person, under the sensitivity settings of the mouse in the game:1. Sign up for Payeer: https://payeer.com/?session=13084023
2. Register with the European Exchanger: https://changer4u.com/ru/aff/e60c9d86e365ae81439dedefa2ad227e3ac569d6
3. Replenish Payeer with an exchanger.
4. In Payeer replenish Litecoin.
5. When buying, choose Litecoin from the payment methods.
When paying with Litecoin, there is no banking commission and the price of the item is lower.
You can also pay with skins from Steam: https://dzen.ru/video/watch/65c05a87bf878653f5ccff1d
sensitivity for 1x - 50, 2x - 48, 4x - 47. For 90...144 fps (in the line: m416_ms = 89), for 60 fps (m416_ms = 97). If you have a different FPS, then you will need to choose a different value.
Attention!!! There is a possibility that for technical reasons ("Input Lag" - affecting the work of macros), or when modifying the weapon, if the sight pulls down during shooting, then reduce the values in the mouse sensitivity settings in the game, if up, then increase. You also need to have a fixed FPS. If the FPS falls, the rate of fire will begin to decrease and the sight will pull down, if the fps increases, then the rate of fire will also increase and the sight will pull up.
If the mouse sensitivity settings in the game are too large for you, or too small, then you can change the dpi of your mouse, this will not affect the operation of the scripts.Script management and script versions:
When the script is turned on, the ScrollLock icon will light up on the keyboard, when the script is turned off, the ScrollLock icon will turn off.Enabling scripts is carried out by pressing the control buttons of the mouse once, pressing again turns off the script.
5th mouse button - on/off script.
4th mouse button - switching between sights 1х - > 2х - > 4х.
For comfortable use of scripts, you need keyboards with buttons: NumLock and CapsLock.
There are also separate recoil removal modes for different sights. Control is carried out using the 4th mouse button.
1x - this mode of removal is enabled by default after starting the script (NumLock and CapsLock are disabled).
2x - the recoil removal mode for this sight is turned on after the first single press of the 4th mouse button (NumLock on the keyboard lights up).
4x - the second pressing of the 4th mouse button will turn on the removal mode for this sight (CapsLock will light up, NumLock will go out).
The third press will return to the 1st sight and so on in a circle (CapsLock will go out).
v6.1 - after starting the script, removing the recoil for 1x...4x sights when pressing the left mouse button. With the right mouse button pressed, there is a fixed recoil removal mode for the 1st sight (mouse sensitivity settings in the game, for third-person shooting - 49). That is, for example, you have the recoil removal mode turned on for the 4x sight, then for third-person shooting you will have the recoil removing mode for the 1x sight.
v6.2 - removing the recoil in these scripts only when the right mouse button and the left mouse button are pressed. If you do not press the right button, the left button will work in its normal mode. That is, these scripts for the aiming mode, in which aiming is carried out by holding the right mouse button in the pressed state.
VIDEO: https://youtu.be/XF7OP5UYtBU
After payment you will receive a link to download the archive with macros. If you accidentally closed the page with this link, you can return it by clicking on the link in the letter that came to your e-mail after payment. You can also go to your personal account at oplata.info and your purchase will be displayed there.
Problems that happen with Logitech and how to solve them!!!
If you have a G304, G305, G602, G603, G604 or similar mouse that cannot be connected to a wire. And if your scripts do not work stably on it. Then you better sell such a mouse and buy yourself another, any wired Logitech, in order to use scripts normally.If you have a G600 mouse, then you should use only the GHUB program.
Before installing the GHUB, you must have Logitech Gaming Software installed.
The Logitech Gaming Software, or GHUB program is best run with administrator privileges.
Sometimes the GHUB can is buggy, the scripts stop working and you need to reinstall it.
Third-party programs that can use side mouse buttons, for example Diskord, can cause problems with running scripts, keep this in mind.
Profiles for games in GHUB and Logitech Gaming Software, it is better not to use because of possible problems with anti-cheat. It is better to use a desktop profile with the "persistent" attribute.
If you have a lot of profiles, then script interruptions are possible. That is, at some point, there will be no recoil removal.
You should also be familiar with the numbering of the mouse buttons.
In new versions of GHUB there are problems with importing scripts, with their preservation and launch. The problem is resolved if you select English in GHUB.
If you cannot solve the problems in the new version of GHUB, then you need to download the old version of GHUB: https://drive.google.com/file/d/1ffXNTp5iQZ8woltyIj7CKkeY6Oz6ux3x/view
After installing the old version of GHUB, you immediately need to clear the check mark in - Enable automatic update.